You can make a contribution to support
Simple
trACtors online, safely and
securely, using our PayPal account.
Click for a closer view
NEW! hydraulic loader
for Allis-Chalmers lawn and garden tractors
Allis-Chalmers hydraulic loader is ideally suited for light commercial and farm use. Built for strength and durability, it is excellent for handling topsoil and dirt. Its hydraulic operation means faster, easier loading of loose materials. With 500 lbs. breakout force, this loader lifts full buckets every time. Bucket is 42" wide, holds four cubic feet and lifts 300 lbs. to full height. Dumping height is five feet. A sub-frame is attached to the tractor. The main loader and frame is very quickly and easily removed from the sub-frame, allowing the tractor to be quickly available for other jobs.
SPECIFICATIONS
Lifting Capacity @ Full Height
300 lbs.
Carrying Capacity @ Ground Level
500
lbs.
Maximum Clearance @ Full Height
59
inches
Reach at Full Height with Bucket 45°
Dump
18 inches
Reach at Ground Level
31 inches
Digging Depth Below Grade
1-1/2 inches
Bucket Size
42" width - 4 cu. ft. capacity
heaped
Bucket Control
Manual trip
Cycle Time
Up: 4 seconds
Down: 2 seconds
Center-mounted equipment may be used
without removing loader.
HYDRAULIC SYSTEM
Front crankshaft-driven hydraulic pump
with integral
Single spool control valve
Pump capacity at 2000 rpm
1.5 gpm
Maximum operating pressure
1250 psi
Hydraulic system capacity
2 qts.
Screen-type oil filter in suction line
Two single-acting lift cylinders with
1-1/4" bore and 1-1/2" stroke
FROM THE TRACTOR PEOPLE WHO MAKE THE BIG ONES
ALLIS-CHALMERS
Source: Allis-Chalmers sales/spec sheet, LG-147/659,
courtesy of Del Allen
