">
 
Keep it simple... keep it going... and keep it!
 

Up

Search for Manuals
at Simplicity's Technical Publications Site

Enter the MFR Number:

Shirts, hats, mugs & more in the

You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.

 

   

Model T-16H Tractor

ENGINE 

MAKE & MODEL

Briggs & Stratton Model 328430.

TYPE

Single cylinder, air cooled, four cycle gasoline engine

BORE

3-7/16 Inches.

STROKE

3-1/4 Inches.

DISPLACEMENT.

32.4 cubic inches.

HORSEPOWER

18 H.P. @ 3800 R.P.M.

LUBRICATION

Splash type. 4 pint capacity

FUEL

 Regular gasoline

FUEL TANK CAPACITY

10 quarts.

AIR CLEANER

Dual element heavy duty paper cartridge and oiled polyurethane foam. Both reusable.

CARBURETOR

Float type with idle and power mixture adjustments. Manual choke.

FUEL FILTER

Clear, in line replaceable filter.

SPEED CONTROL

Mechanical governor fully enclosed, running In oil. Manual speed control permits matching engine speed to job conditions.

VALVES Austenitic steel intake valve. Stellite faced ex­haust valve. Stellite exhaust seat insert. Intake and exhaust valve rotators.

STARTER -GENERATOR

12 volt belt driven motor generator with 14 amp. voltage regulator.

IGNITION

High tension, flywheel type magneto

CYLINDER, PISTON

Cast iron cylinder, aluminum alloy piston with chrome plated rings

MAIN BEARINGS  

Two shielded ball bearings


TRANSMISSION - HYDROSTATIC

TYPE

Vickers variable piston pump to fixed piston motor

WORKING FLUID  

Dexron automatic transmission fluid (1.75 quarts)

COOLING

Transmission radiator and fan.

FLUID RESERVOIR

Separate

FILTER

Full flow in reservoir.

SOFT RIDE VALVE

Eliminates starting jerk.

RELIEF VALVE  

Relieves over pressurization of hydrostatic fluid.

NEUTRAL IDENTIFICATION

Z pattern shift

GEARS

Hardened spur gears.

DISCONNECT FOR PUSHING TRACTOR

Standard

DISCONNECT FOR WINTER STARTING  

Standard.

LUBRICATION (GEAR BOX)

2.5 quarts SAE 90

SPEEDS

0-7 M.P.H Forward. Infinite variation. 0-4 M.P.H. Reverse. Infinite variation.


BEVEL GEAR DRIVE AND POWER TAKE OFF

MITER GEARS

Case hardened, spiral bevel gears

BEARINGS

Ball and needle bearings

SHAFTS  Hardened and ground.

LUBRICATION

1.0 pints SAE 90


DIFFERENTIAL

TYPE

Spur gears with 8 planet pinions spring loaded for limited friction drag.


BRAKES

 

TYPE

Drum type on transmission shaft


CLUTCH

TYPE

Belt tensioning


Click for a closer view

 


TRACTOR
 

BRAKE - CLUTCH  

Single pedal, right foot control.

PARKING BRAKE

Independent control linkage.

STEERING RATIO

5.5 to 1.0.

FRONT AXLE

High center clearance with attaching points for front or center mounted attachments.

SAFETY INTERLOCKS

Prevent starting engine unless transmission is in neutral and power take-off is disengaged.

POWER
TAKE-OFF

At front of engine through electric clutch or from left hand side of bevel gear box through belt tightener clutch.

IMPLEMENT LIFT  

Electric.

LIGHTS

Standard.


DIMENSIONS

HEIGHT (AT
STEERING WHEEL)

41.0 inches.

HEIGHT (AT
DASHBOARD)

35.5 inches.

WIDTH  

37.5 inches.

LENGTH

70.0 inches.

FRONT WHEEL
TREAD

30.9 inches.

REAR WHEEL
TREAD

27.0 inches.

CLEARANCE,
FRONT AXLE

8.0 inches.

CLEARANCE,
TRANSMISSION

6.0 inches.

WHEEL BASE

48.1 inches.

TURNING RADIUS

80.0 inches.

FRONT TIRES

16-6.50 x 8.

REAR TIRES   23-10.50 x 12.

 

 

 

 

 

 

 

 

 

 

 

[Source: Homelite specifications sheet, exact date unknown, courtesy of Sam Ericson]

 

 

NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
©
1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.

 

Please support our sponsors  . . . 
and help keep this site free for your use.