Model T-16S Tractor

ENGINE
MAKE & MODEL	Briggs & Stratton Model 326430.
TYPE	Single cylinder, air cooled, four cycle gaso­line engine.
BORE	3-9/16 inches.
STROKE	3-1/4 inches.
DISPLACEMENT	32.4 cubic inches..
HORSEPOWER	16 H.P. @ 3600 R.P.M.
LUBRICATION	Splash  type. 4 pint capacity.
FUEL	Regular gasoline.
FUEL TANK CAPACITY	10 Quarts.
AIR CLEANER	Dual element heavy duty paper cartridge and oiled polyurethane foam. Both reusable.
CARBURETOR	Float type with idle and power mixture adjust­ments. Manual choke.
FUEL FILTER	Clear in line replaceable filter.
SPEED CONTROL	Mechanical governor fully enclosed, running in oil. Manual speed control permits matching engine speed to job conditions.
VALVES	Austenitic steel intake valve. Stellite faced ex­haust valve. Stellite exhaust seat insert. Intake and exhaust valve rotators.
STARTER/GENERATOR	12 volt belt driven motor generator with 14 amp voltage regulator.
IGNITION	High tension, flywheel type magneto.
CYLINDER, PISTON	Cast iron cylinder, aluminum alloy piston with chrome plated rings.
MAIN BEARINGS	Two shielded ball bearings.
TRANSMISSION - (Shuttle & Four Speed Gear Box)
Shuttle
TYPE	Single lever forward and reverse control through a split-V pulley and planetary gears. A band brake to lock and unlock the planet carrier forward and reverse.
Four Speed Gear Box
GEARS	Carburized and hardened spur gears
BEARINGS	Ball and needle bearings
LUBRICATION	2.5 quarts SAE 90, Gear oil.
SPEEDS @ 3600 R.P.M	Forward	Reverse
	1st - .96 M.P.H.	.96 M.P.H.
	2nd - 2.34 M.P.H.	2.34 M.P.H.
	3rd - 3.98 M.P.H.	3.98 M.P.H.
	4th - 5.53 M.P.H.	5.53 M.P.H.
BEVEL GEAR DRIVE & POWER TAKE OFF
MITER GEARS	Case hardened, spiral bevel gears.
BEARINGS	Ball and needle bearings.
SHAFTS	Hardened and ground.
LUBRICATION	1.0 Pints SAE 90, Gear oil.
DIFFERENTIAL
TYPE	Spur gears with 8 planet pinions spring loaded for limited friction drag.
BRAKES
TYPE	Drum type on transmission shaft
CLUTCH
TYPE	Belt tensioning

Click for a closer view