You can make a contribution to support
trACtors online, safely and
securely, using our PayPal account.
Put more versatility into your power-plan
These "add-ons" help you power through special work-load
situations . . . help you meet varying surface conditions with ideal traction and safety. Wet, soft, loose, slick, the 720 goes to work more ways, on more days to give you a power-partner you're proud to own.
Click each item for a closer view
CHAINS add grip and go when traction conditions are soft or slick. Loaders, blades, snow throwers often can use the extra grab in snow, sand or wet areas.
OPTIONS include three separate choices; turf (20 x 8.00-10) where primary use
is lawn maintenance; high capacity (6.90/6.00-9) for use with front end loaders, blades, snow throwers;
Ag (4.00-12) for open ground and field work.
keep the front end down with heavy rear-mounted attachments in tow. Improves steering and control on the job.
attach to front bumper. Easy on, easy off.
FRONT TOWMOUNT . .
. gives you head-on control of moving and positioning wide variety of
vehicles . . . from boat trailers to aircraft. Hitch plates attach to side frames of
tractor . . . reduce pressure on front axle and tires for light touch steering.
FRONT BUMPER . . . protects the tractor grille and hydraulics when raising front end loader bucket over truck or trailer
sides . . . lets you move up close for clean dumping. Also provides mounting bracket for front weights.
REAR LIGHT . . . when you're rushed for time, and you need extra hours on the job, this rear, fender-mounted
work light floods the hitch and work area to help you move right along with minimum drop in efficiency over daytime operation.
OPTIONS . . . three selections to mix or match with front tire options; high flotation for difficult off-the-road traction conditions (31 x 15.5-15)
. . . turf for lawn work and light landscaping (29 x 12.00-15) . . . Ag where ground working has the priority (8-16).
60 LB. REAR WHEEL
WEIGHTS . . . add extra traction pressure for snow removal, open field work and front end loader work.
One-piece built on
design . . . with slotted bolt entry for easy line-up and handling.