KOHLER
CAST IRON ENGINES
10, 12 and 16 hp dynamically balanced Kohler engines provide dependable
vibration-reduced power. Positive valve rotators, stellite faced valves
and ball bearing mounted crankshaft provide long life trouble free
service. Automatic compression release and gear drive Bendix starter
means fast starting in all weather conditions. |
TILT-UP HOOD
AND SEAT DECK
Unusually easy service accessibility is provided with a tilt-up hood and seat deck assembly. Provides quick and easy service accessibility for routine maintenance or adjustments. In addition, seat deck is shock mounted to help isolate operator from
vibration. |
CONTROLLED
TRACTION
Allis-Chalmers own limited slip differential on rear wheels provides
automatic controlled traction, putting more drive force on the wheel with
best traction in slippery going. Aids maneuverability and control, helps
reduce scuffing in tight turns, too. |
IN-LINE DRIVE
Allis-Chalmers in-line design aligns engine, bevel gear box and
transmission driveshaft with crankshaft to help reduce vibration. Belt power transfer dampens shock loads between engine and transmission for smoother operation, less gear and bearing wear.
|
 |
3
TRANSMISSIONS
Three dependable Allis-Chalmers custom designed transmissions fit
virtually every need: 6 speed manual shift... Shuttle drive for instant
forward/reverse within
4 speeds... Hydrostatic drive that lets you change direction and control
ground speed without clutching. All have belt power transfer that puts a
shock dampener between engine and transmission to reduce shock loads and
gear and bearing wear. |
|
TOUGH FULL LENGTH FRAME
Heavy duty full length steel frame cradles engine and power train to maintain critical parts alignment, season after season. |
|
3 "LIVE" POWER TAKE-OFF POINTS
Engine power independent from the transmission is provided at 3 power take-off points--front, center and rear. Easy on, easy off implements can be powered without long belts or complicated brackets. |
