">
 
Keep it simple... keep it going... and keep it!
 
  Home> Allis-Chalmers> AC 800 Series> 816 GT> 808 GT Tech Specs

Up

Search for Manuals
at Simplicity's Technical Publications Site

Enter the MFR Number:

Shirts, hats, mugs & more in the

You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.

 

Specifications:  AC Model 808GT Tractor

Engine

 

 

Model

Briggs and Stratton, Model NO:191707

 

Overall Width

35.1 (889)

Type Gasoline, 4 cycle, single cylinder, vertical crankshaft

Horsepower @ 3600 RPM

8 (5.97kw)

Height To top of steering wheel: 39 inches (991 mm)
To top of engine cover: 33 inches (1156 mm)

Bore and Stroke

3” (76mm) X 2-3/4” (70mm)

 

Wheel Base

45.5 inches (1156 mm)

Displacement

19.44 cubic inches (399cc)

 

Shipping Weight With Mower

520 lbs. (236 kg.)
Electrical System

Dual circuit alternator, D.C. charging circuit, A.C. light circuit

 

12 volt-32 Amp. Hr. Automotive battery

 

Ammeter Key ignition
Starter: 12 volt gear drive
  Dual headlights
Separate indicator lights for safety interlock switches
Ignition Type: Flywheel magneto w/key switch
Dust proof breaker enclosure under flywheel

Governor

Type: adjustable, mechanical, running in oil.
Range: 1750 to 3400 R.P.M (approximately)

Air Cleaner Sealed joint housing, oiled foam element
Crankcase Breather: ventilated through carburetor
Lubrication: geared impeller system
  Oil capacity: 2-1/4 pints (1.1 L)

 

Fuel Tank Material: high density polyurethane

Fuel level gauge built into filler cap

 

Capacity: 2.2 Gallons (8.4 L)
Muffler

Quiet compact, low back pressure

TRANSAXLE

 

Type All spur gear, running in oil bath

 

Material Gears: heat treated
Shafts: hardened and ground
Bearings: needle type roller
Lubrication SAE 90 oil capacity: 54 ounces (1.6 L)
Speeds

Three forward, one reverse

 

Speeds @ 3600 R.P.M

 

Low: .9 mph (1.4 kph)
Second: 2.3 mph (3.7 kph)
High: 3.9 mph (5.8 kph)
Reverse: 3.9 mph (5.8 kph)
Differential All gear, controlled traction type
CHASSIS
Frame Channel, heavy gauge steel

 

Power takeoff points: front and rear
Rear Wheels Pivot point location: front axle

 

Tire size:18 X 9.5 - 8 terra-tread (tubeless)
Air Pressure: 6 to 8 p.s.i (41-55 kPa)
Front Wheels Tire size: 15 X 6.00 - 6

 

Air pressure: 12 to 15 p.s.i (41-55 kPa)
Bearings: sintered iron with grease fittings

Accessibility

Hood tips forward, seat tips back, for accessibility

 

Seat

Type: bucket, high back

 

Adjustable to suit different size operators
Turning Radius

Inside rear tire: 25 inches (.635mm)

 

DIMENSIONS
Overall Length 63.5 inches (1613)

 

Source:  AC Operator's Manual, MODEL 808GT and 810GT Lawn & Garden Tractor, Part Number 1656827, September 1976.

 

 

 

NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.

 

Please support our sponsors  . . . 
and help keep this site free for your use.