Keep it simple... keep it going... and keep it!
  Home> Allis-Chalmers> AC 800 Series> 816 GT> 816 GT Tech Specs


Search for Manuals
at Simplicity's Technical Publications Site

Enter the MFR Number:

Shirts, hats, mugs & more in the

You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.


Specifications: AC Model 816 Garden Tractor, Mfg # 1690437


Make: Briggs & Stratton
Model No.: 401707
Type: 0 132-01
Horsepower: 16 @ 3600 RPM (12 kW)
Cycles: 4
Cylinders: 2
Bore: 3.44" (87 mm)
Strokes: 2.16" (55 mm)
Displacement: 40 Cu. In. (656 cm3)
Crankshaft: Vertical

Electrical System: Dual Circuit Alternator, D.C. Charging Circuit, A.C. Light Circuit 12 Volt - 39 amp hr. Auto Battery, Dust Proof Breaker Enclosure Under Flywheel.

12 Volt Gear Drive

Type: Mechanical, Adjustable, running in oil
Range: 1750 to 3400 RPM (Approx.)

Air Cleaner: Sealed Joint Housing
Element: Dual - H.D. Paper & Oiled Foam

Crankcase: Ventilated through Air Cleaner-Gear Impeller

System 3-1/2 pints (1.66 liters)

Fuel Tank:
Material: Non-Corrosive Polyethylene          Capacity: 2.2 Gallons (8.3 liters)

Muffler: Quiet Compact, Low Back Pressure


Type: All Spur Gear, Running in Oil Bath

         Gears: Heat Treated
         Shafts: Hardened and Ground
         Bearings: Needle Type Roller Bearing on Shafts

Lubrication: Multi-Purpose Oil: 38 ounces (1.2 liters)

Speeds: Three Forward, One Reverse

Speeds @ 3400 RPM:
         Low: 1.1 MPH 0.8 km/h)
Second: 2.8 MPH (4.5 km/h)
Third: 4.4 MPH (7 km/h)
Reverse: 2.8 MPH (4.5 km/h)

Differential: All Gear, Controlled Traction Type


Frame: Heavy Gauge Steel Channel

Power Take-Off Points: Front& Rear
Engine Mounting:
Above Front Axle
Pivot Point Location: Front Axle

Rear Wheels: 20 x 10.00-10 Turf Type
Pneumatic Infla. Pressure. 7 PSI (48 kPa)

Front Wheels: Tire Size: 15 x 6.00-6 Pneumatic Infla. Pressure: 14 PSI (97 kPa) kPa)

Accessibility: Hood Tips Forward, Seat Tips Rearward

Seat Type: Bucket, High Back
Adjustable to Suit Different Size Operators

Turning Radius: Inside Rear Tire: 24" (610 mm)


Steering: Full Circle Steering Wheel
Gear and Sector

Clutch-Brake Pedal: 

         Location: Right Front
Clutch: Soft Action, Touch-O-Matic V-Belt
Brake: External Band Type
Parking Brake Lock, Foot Engaged


Implement Lift Lever: Right Side
Power Take-off Clutch Lever:
Left Side
Gear Selector: Front Center of Seat
On Instrument Panel: Ignition Key Switch
Light Switch
Throttle Lever
Choke Control Knob
Separate Indicator
Lights for Safety Interlock Switches

Parking Brake Lock: On Clutch-Brake Pedal


Overall Length: 66.5" 0.69 m)

Overall Width: 35.5" (901 mm)

To top of Steering Wheel: 40"(1016mm)     
To top of Engine Cover: 34.5" (876 mm)

Wheel Base: 48.2" (1.22 m)

Shipping   Weight w/Mower (approx.):

Tractor w/48" - Mower - 671 lbs. (305 kg)
Base Tractor w/o Mower 430 lb. (195 kg)


Effective Cutting Width: 48" 0 219 mm)

Overall Width w/Deflector: 63" (1.6 m)

Weight: 121 lbs. (54.9 kg)

Variable Cutting Ht.: 1-1/2 to 3-1/2" (38 to 89 mm)

Blade Arrangement: Three Staggered Blades

Mower Drive: V-Belt from Tractor PTO Pulley

Spindle Bearings: Lubricated & Sealed Ball Bearings





Allis-Chalmers reserves the right to make changes in the above specifications or to add improvements at any time without notice or obligation.


Source:  Operator's Manual, Model 816 GT, Part # 1666090, March 1979




NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.


Please support our sponsors  . . . 
and help keep this site free for your use.