You can make a contribution to support
Simple
trACtors online, safely and
securely, using our PayPal account.
B-10 Specifications
STANDARD EQUIPMENT: Four cycle Briggs& Stratton air-cooled gasoline engine with "Oil Foam" air cleaner, 12 volt electrical system: electric starter-generator; magneto ignition; key ignition switch; push-button starting; controlled traction differential; 3 forward and 1 reverse speeds; draw bar; foot-operated clutch and brake; foam rubber padded seat with arm and back rests; foot rest; implement lift system with left hand lift lever; 3 PTO outlets; 4:80 x 8 (2-ply) front tires, 23-8:50 x 12" rear tires; hinged seat, removable hood; painted yellow and black with cream trim.
Click the picture for an even closer view.
ENGINE, COMPONENTS AND DRIVE
Horsepower*
10
Make
Briggs & Stratton, Series 243431
Bore and Stroke
3-1/16'' x
3-1/4"
Displacement
23.94 Cu. In.
RPM
3600 Maximum full load
Starter
Electric and Manual
Governor
Mechanical, adjustable, full lubrication
Ignition System
12-Volt (starter, generator, magneto)
Transmission
Sliding spur gear & bevel gear
Differential
Spur gear with controlled traction
Engine/Trans. Drive
Direct shaft, flexible couplings,
final drive reduction gear case
CAPACITY
Engine Case
2 Quarts
Fuel Tank.
6 Quarts
SPEEDS
First
2 mph
Second
3-3/4 mph
Third
6 mph
DIMENSIONS
Height (at Steering Wheel)
37-1/2"
Height (at Hood line)
33-7/8"
Width
34-1/4"
Length
68-1/8"
Wheel Tread
26"
Wheel Base
44"
Clearance (front axle)
9-1/2''
Clearance (Differential)
6"
Clearance (Drawbar)
7"
Clearance (Ctr. Housing)
15-1/4''
SHIPPING WEIGHT (Approx.)
685 lbs.
* Rated by Briggs & Stratton to the SAE J-607 Engine Test Standard.
Allis-Chalmers reserves the right to make changes or improvements in the equipment described in these specifications at any time without notice or obligation.
