You can make a contribution to support
Simple
trACtors online, safely and
securely, using our PayPal account.
12 H.P. ATTACHING KIT MFR. NO. 510
Click for a closer view
MOUNTING INSTRUCTIONS
1. Insert the No. 125106 cross mount assembly
through the holes in the bevel gear housing plates on the tractor and secure
with the (1) 7/16-14 x 1” long capscrew, lockwasher and full hex nut as shown
above.
2. Attach the No. 125107 right mount assembly to the cross mount assembly as
shown in Figure 1 using the 3/8-16 x 2-1/2” long capscrew, lock-washer and full
hex nut.
3. Attach the Nos. 125108 and 125109 left
and right hand sub-frames to the front mount bracket with the (2) 1/2-13 x
1-1/4” long cap-screws, lockwashers and full hex nuts. Attach the rear of the
sub-frames to the cross mount assembly using the (2)1-1/2-13 x 1-1/4” long
capscrews, lock-washers and full hex nuts as shown above.
Click for a closer view
12 H.P. FRAME GROUP
Ref.
Let.
Part No.
Name of
Part
Description
A
125106
Cross Mount
Henry 02019805
B
125107
Right
Mount
Henry
#2019803
C
705014
Screw-Cap-Hex
3/8"-16 N.C. x 2.-1/2" lg. Henry #919363
D
717003
Nut-Hex-Full
3/8"-16 N.C. Henry #916950
E
720002
Lockwasher
3/8" Henry #916965
F
705041
Screw-Cap-Hex.
7/16"-14 N.C. x 1" lg. Henry #918212
G
717022
Nut-Hex-Full
7/16"-14 N.C. Henry #918213
H
720006
Lockwasher
7/16" Henry 4918199
I
125108
Sub-Frame-Right
Henry
142019806
K
125109
Sub-Frame-Left
Henry #2019807
L
125110
Front
Mount
Henry
42019804
M
706021
Screw-Cap-Hex
1/2"-20 N.F. x 5" lg. Henry #916428
N
125068
"V"-Belt
Henry
142019808
P
125112
Spring
Henry
142019405
[Source: Simplicity Owner's Manual, Front
End Loader, Mfrs. No. 515]
