Click for a closer view

Figure 3

5. . Remove the capscrew and washers from the tractor directly below the front P.T.O. shaft.  Insert capscrew through the two belt stops and then reassemble. The L.H. belt stop should be nearest the tractor frame and the R.H. belt stop nearest the bolt head. Do not tighten securely at this time. (See Fig. 3)

6. Glean front P.T.O. shaft and attach front pulley. Mount pulley, hub out, flush with shaft. Secure setscrew down on key. (See Fig. 3)

7. Attach the hitch assembly to the tractor with two pins and two spring clips. The notches in the hitch assembly fit over the front axle. (See Fig. 4)

Click for a closer view

Figure 4

[Source:  Owner's Manual, 36" Rotary Snow Thrower (2029938), Allis-Chalmers Outdoor Products Division, FORM TM-7033]

NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
© ™ 1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.