You can make a contribution to support
Simple
trACtors online, safely and
securely, using our PayPal account.
ATTACHMENTS
take the
backaches out of yard work!
Click each picture for a closer view
46” Sickle Bar (Mfg. No. 346) Slices effortlessly through heavy growth, even over rough terrain and steep slopes. Cuts 1.2 acres an hour in high gear at half throttle. Mounts on the side, between front and rear wheels, in minutes. Hand
control lever, or new Hydrolift raises and lowers bar. Mows above and below horizontal without losing cutting ability. Spring mechanism protects knives from obstructions;
recouples without operator dismounting. Adjusts to vertical position for
transportation. (Requires No. 349 Power Take-Off.)
46” Dozer Blade(Mfg. No. 356) This heavily reinforced
46" blade is protected against shocks by two heavy springs. It
angles right or left, in five positions. Adjusts from operator’s seat. Blades is removable, and can be inverted. Attaches to front axle of
tractor to tip with front wheels, to follow contour of surfaces. Adjustable shoes regulate height of dozer blade. Rear counterweights area
recommended if baud lever is used rather than Hydrolift. Wheel weights and tire chain will give maximum traction.
Dump Cart (Mfg. No. 085) Leave the heavy hauling to this welcome
attachment. Hauls 1,000 lbs. easily, and can be completely tipped without disconnecting the trailer hitch or lifting trailer wheel from ground. Balanced for easy
dumping. Heavy-gauge steel, completely reinforced. Detachable tailgate. Attached easily without tools. Size 39” x 26” x 12”.
36" Lawn Roller(Mfg. No. 227)
Not illustrated. This 36" lawn roller attaches easily to the
Landlord with just one pin. It covers the wheel span of the tractor
and weighs 370 lbs. when filled wit water. Roller surface is kept
clean during operation by spring-loaded scraper blade.
Mobile Alternator Generator(Mfg. No. 220)
Starts motors that normally require 2500 watt generators, delivers a 30
amp. current for 20 seconds, 20 amp. starting current for two
minutes. Has 1500 watts, 13 amp., 115 volts, 60-cycle with
voltmeter. For driving electric lawn mowers, hedge trimmers, pruning
equipment, power saws, and stand-by power.
Summer Cab(Mfg. No. 283) You’ve got it
made in the
shade with this cool protection from the sun’s searing stare. Tubular steel bracing attaches to the frame with just 8 bolts.
Unique Lift-O-Dot Snap Couplers secure the fabric in seconds. Lots of head room, excellent visibility all around, yet the sun doesn’t reach you.
Winter Cab(Conversion Kit) This kit converts the summer cab for warm winter use, protecting you from icy winds, snow and cold. Clear vinyl plastic windows in curtains on front, two sides, and rear give
360 degree visibility. Dark cloth on front windshield cuts blinding glare off hood, prevents snow
from entering cab. Side curtain can he removed independently. Cab can be pivoted on rear support for easy access to controls and engine. (Mfg. No. 282)
32” Rotary Tiller (Mfg. No, 174)
Prepares ideal seed beds with gentle blending action that never pulverizes soil structure. Strong, non-clogging, self-sharpening tines. High-Low range speed kit can be effectively used to reduce speed and increase power.
Precision anti-friction bearings. Hydrolift lever raises tiller when desired.
(Recommend No. 223 front counterweight for balance
when using hand lift lever. ) Another Pulley Kit (Mfg. No. 238) reduces tractor speeds. Tillage width can be increased to 42” with optional extension tines No. 212.
8-12" Disc Harrow(Mfg. No.
206) One pass smoothes, evens seed beds, or forms hilling.
Reversible gangs can be adjusted to throw in or our. Attaches in
seconds without tools. (Requires No. 203 Hitch Adapter. Recommend
No. 223 front counterweight and four No. 046 wheel weights.)
High-Low Range Speed Kit: (Mfg. No. 348) Doubles or reduces tractor speeds and makes all speeds instantly available. 10” Pulley Kit:
(Mfg. No. 238). Less expensive than 2-speed transmission pulley, hut reduces all speeds to
permanent levels when attached. Kits especially useful under difficult conditions for snow blower, tiller or mower.
Electric Light Kit: Two 12-volt sealed beam lights. Mfg. No. 318. Electric Starter Generator. Includes 12-volt battery.
Mfg. No. 316.
Dual Wheels: For extra traction and stability. Mfg. No. 286.
Tire Chains: 8-12, pair. Mfg. No. 315.
Speed Reduction Kit: 10” pulley and belt reduce normal speeds to increase power. Use for Snow Thrower in heavy snow, and with Rotary Tiller for deep tilling.
Mfg. No. 238.
Hub Caps: Set of 4. Mfg. No. 280.
Dual Lift Lever Kit:Mfg. No. 312. Front Counterweight, recommended for rise with heavy rear-mounted attachments. (Front and rear
counterweights are not needed with Hydrolift feature; only with hand lift lever.)
Mfg. No. 223. Hitch Adapter necessary for Moldboard Plow, Disc Harrow, or Cultivator Blade.
Mfg. No. 203. Rear Counterweight for Snow Thrower. Mfg. No. 182. Collar weight for Snow Thrower and Dozer and Dozer Blade.
Mfg. No. 045.
Wheel Weights: Mfg. No. 046.
Original, damaged catalog courtesy of Steve
Redfern with some pictures courtesy of Chris Geise. Entire catalog in great
condition, courtesy of Wally Becker.
