">
 
Keep it simple... keep it going... and keep it!
 
  Home> Simplicity> New in 1972> Other Attachments

Up

Search for Manuals
at Simplicity's Technical Publications Site

Enter the MFR Number:

Shirts, hats, mugs & more in the

You can make a contribution to support Simple trACtors online, safely and securely, using our PayPal account.

 

Rotary Mowers... 48" (Mfrs. No. 740) 42" (Mfrs. No. 784)
Effective Cutting Width 48" (for Sovereign only)  42" (Sovereign or Landlord)
Mowing Capacity Up to 2 acres an hour  Up to 2 acres an hour

Dimensions

36" long x 54" wide x 6" deep 35" long x 47" wide x 6" deep

Mower overall width (including deflector)

54" 47" 
Deck height above blade

6"

 6"
Cutting Height Continuously variable between 1-1/8" and 3-1/8"
Blade Arrangement Three staggered overlapping blades.
Mower Input Drive Tractor center PTO clutch controls power to cushioning V-belt to mower center spindle
Side Spindle Drive Cushioning V-belt with spring-loaded idler. Couples all spindles.
Spindle Bearings Sealed rolling contact

Sickle Bar (Mfrs. No. 785) ,

Effective Width

46"

Mowing Rate

Up to 1 acre an hour

Slope mowing angle up or down (relative to tractor)

45 up. 20 down.

Pitman Bearings

Sealed heavy duty rolling contact.

Drive

V-belt from tractor center PTO clutch through planetary reduction gear at mower head.

Cultivator (Mfrs. No. 699)

 Maximum Width

48" 

Minimum Width Between Center Shovels

4" 

Vertical Adjustmentof Standards

5"

Number and typeof Sweeps

5 Duck foot, heat treated steel

   

Lawn Roller (Mfrs. No. 227)  

Effective Width

36" 

Water Capacity

40.2 gallons 

Dimensions

51" 

 

18" high 

 

44" wide 

Roller Diameter

18" 

   

Spring Tooth Harrow (Mfrs. No. 408)

Maximum Effective Width

42"

Teeth

7 heat treated high carbon steel teeth 

Adjustments

Tooth spacing and vertical height are individually adjustable. Tool bar adjusts vertically from hitch to change draft angle. Two adjustable gage shoes control depth.

Draft Angle

Tool bar adjustable vertically from hitch

10" Moldboard Plow (Mfrs. No. 464)

Width of Cut

10"

Rank of Plow( ground clearance)

15-1/4"

Overall Dimensions

41" long x 25" high

Coulter Diameter

11-1/2"

Coulter Adjustments

Vertical - 4"

Transverse - 1-3/4"

Fore and aft -- 4 positions

Landside Length

26"

[Source:  Simplicity brochure, 15hp and 10hp tractors, Form 11-007, hand-dated 7/24/72, courtesy of Wally Koerbel]

 

 

 

NOTE: This site is designed to be viewed in at least 1024 x 768 resolution in Internet Explorer v6 or later, Mozilla Firefox v4 or later, and Google Chrome.  It may not display correctly in other resolutions or on other devices.  Links on this site are monetized.  We assume NO liability or responsibility for the accuracy of ANY data on this site.    
1998 - 2011 by Simple trACtors LLC, North Brookfield, MA. All rights reserved.

 

Please support our sponsors  . . . 
and help keep this site free for your use.