Attachments hitch up fast and easy, work fast and easy. All-season attachments go on and off in a matter of minutes. With simple pin and clip in most cases. Three point hitch for rear mounted implements has individual screws to control attachment tilting. Hydraulic power for lifting and positioning all attachments
takes the effort out of operation. One lever controls rear and center attachments. Another controls front implements.
Click each picture for a closer view
Rear mounted cultivator breaks up soil to prepare ideal seed beds. Works throughout the summer to
help with weed control. To let moisture get down to the roots, where it does the most good for growing
Effective width: 54"
Overall width: 60”
Overall length including tractor: 123”
Maximum crop clearance: 15"
Number of shovels: 7.
Shovel spacing @ maximum width: 8”
Gage wheel size (adjustable): 3.50 x 4.00 Pneumatic.
Single coil spring leaf.
Shovels: Reversible double spear points.
Frame (outer): Heavy duty channel construction.
Frame (center): Arch construction to elbow mounting single row Cole planter.
(approximate): 185 pounds.
|60” Rotary Mower.
if you have grounds to maintain, you’re bound to have some big mowing chores. Patented free-floating
mower goes at it 5 ft. at a pass, up to 4 acres per hour. Gives you a smooth, even cut, because the mower follows the ground instead of
the tractor. Cutting height adjusts from 1-5/8" to 3"
Effective cutting width: 6O"
Mowing capacity: Up to 4 acres an
Height of cut: 1-5/8" to 3"
Type of adjustment: Twin self-locking stepless screws.
Blade arrangement: 3 staggered overlapping 21” blades.
Width (across tractor): 71”
Length (front of hitch to rear of rollers): 38”
Height (ground to top of mower): 11½’
Effective dipping channel (height above blade):
Trim overhang (left side of tractor): Ag Tires 8.” Turf Tires 4½." High Float Tires 1½."
Mower Input drive V-Belt through electric clutch.
Blade drive: V-Belt with spring loaded
Spindle bearings Caged rolling contact, grease lubricated.
Hitching means: Front axle at 2 points.
Weight (approximate): 290 pounds.
|12” Moldboard Plow.
For the soil that needs plowing, the rear mounted moldboard plow. it cuts through trash to turn the soil over with a minimum of effort. Gage wheel and floating hitch maintain constant furrow depth.
Effective width: 12”
Gage wheel: Adjustable.
Coulter 11” diameter.
Hitching means: 3 Point Hitch.
Weight (approximate): 112 pounds.
48” Rotary Tiller.
Breaks up sod, previously worked soil and ground never worked before — as deep as 8 inches. Long life, self-sharpening tines are easy to adjust or remove. Working depth controlled by limit chain and skid shoes. Ideal for landscaping and putting in new lawns. Works with dozer biade to contour
lawns before seeding.
Effective tilling width: 48”
Tilling depth: Up to 8"
Number of tine clusters: 7 (4 replaceable tines per
Tine circle diameter 16”
Drive means: Rear PTO.
Drive train: Double universal joint drive shaft, bevel gears, cross shaft torque limiting clutch, two stage No. 50 and 60 roller chain drive with hardened sprockets.
Bearings: Rolling contact bearings with grease fittings.
Tine shaft speed: 200 RPM at rated engine speed.
Hitching means~3-point hitch. Category 0.
Weight (approximate): 305
|6O" Grader Blade.
Rear mounted grader blade is reversible for back filling. Angles both right and left. Your best bet for leveling gravel or soil. For landscaping. Can be used with front-end loader or snow thrower to work for you all year
Effective width: 60”
Angle position: 0° 15° and 30° left or right.
Wear Plate: Reversible and
Lift means: Hydraulic through 3 point hitch.
Hitching means: 3 point hitch.
Weight (approximate): 120 pounds.
|60” Snow Plow/Dozer Blade.
The same blade that moves earth and other loose material for you in the spring and summer, clears snow all winter. Works at high tractor speed.
And you control right or left angle from the tractor seat. Special skids support
blade to skim snow from gravel.
Effective width: 60”
Blade mounting: Spring break away.
Angle position: 0° 15° and
30° left or right
Wear Plate: Reversible and replaceable.
Lift means: Tractor front hydraulic control.
Hitching means: Blade attaches with 2 pins to frame mounted hitch.
Weight (approximate): 225
hitch and cylinder.
Complete hydraulic operation makes it easy to use. Year round versatility makes it ideal for industrial plants, farms, nurseries, estates, wherever you need big loading capacity eight cubic foot bucket lifts 400 lbs. with break-out force of 600
Effective bucket width: 42~
Bucket Capacity 8 cubic feet.
Unit construction: Formed steel
Hydraulic system: 1000 PSI.
Break-away 600 pounds.
Lift capacity 400 pounds.
Overall maximum height raised: 113”
Reach from axle to bracket hinge pin:
Digging depth: 4”
Maximum dumping angle: 47°
Bucket rollback: 5°
Reach, bracket on ground: 50."
bucket dumped: 69”
Reach at maximum height, dumped: 18¾”
Height to bucket hinge pin: 89½"
Weight (approximate): 600
|52” Rotary Snow Thrower.
Solid flight welded auger with no pins
to shear, no pins to replace. Yet drive
is protected. High auger speed dears
deep snow, wet snow,
ice and hard
packed snow. Chute rotates 260° with
electric control. Extra large discharge
chute reduces possibility of dogging.
All operating controls are right at
Effective Width: 52"
Overall Length Including Tractor: 9'
Overall Width: 55” Including skid shoes.
Auger Diameter: 14”
Auger Housing Opening Height: 24½”
Scraped Bar to Ground Clearance Fully Raised:
Chute Diameter: 9½"
Chute Rotation Angle: 260°
Spout Rotation Control: Toggle switch on tractor dash.
Auger Drive Control: Toggle switch on tractor
Raise and Lower Control: Tractor power lift control.
Type: Single stage.
Power Source: Tractor front PTO
Clutch: Tractor front PTO electromagnetically controlled
Vertical Drive: Cushioning single, plane V-Belt to jack shaft.
Final Drive: Needle bearing universal joint splined drive shaft to bevel gear housing.
Cross Drive: Disc type universal joint drive shaft.
Final Drive: Roller chain with hardened sprockets.
Chute Rotation: Geared reversible electric motor.
Chute Mounting: Guiding ball bearing rollers.
Front Support: Adjustable large area hardened skid shoes.
Mounting: Hitch bolted to tractor frame. Thrower attaches to hitch with pins and spring dips.
Scraper Bar Full width high carbon steel.
Frame and Auger Housing: Welded steel assembly.
Auger Solid flite welded
Auger Bearings: Self aligning sealed ball bearings with grease fittings.
Weight (approximate): 340 pounds.
48" Rear Rotary Mower.
Effective cutting width: 48"
Overall width: 52½"
Overall length: 50”
Rear PTO through standard universal joint shaft to gear reduction unit.
Gage wheels: One, mounted in rear.
Cutting height range: 1 to 8”
Type cutters: Hinged knife.
Number of cutter spindles:
Cutters per spindle: 2.
Cutler RPM: 1400 at rated engine speed.
Cuttertip speed: 17,600 FPM at rated engine speed.
Hitching means: 3 Point Hitch.
(approximate): 380 pounds.
4r Rear Rotary Mower.